Gw-instek PEL-3000 Series Programming Manual Instrukcja Użytkownika Pobierz pdf (Strona 74)

PEL-3000 Programming Manual

Return parameter

<NR2>

Returns the slew rate in

mA/us.

Example

:CURRent:SRATe MIN

Sets the slew rate to the minimum.

Query example

:CURRent:SRATe?

>5.0

Returns the slew rate as 5.0mA/us.

:CURRent:L1

Set

Query

Description

Sets or queries the CC mode “Level 1” current.

This command is only applicable to dynamic

modes.

Note: A different current value can be set for each

range (High/Mid/Low).

Syntax

:CURRent:L1 {<NRf>[ A ] | MINimum | MAXimum }

Query Syntax

:CURRent:L1?

Parameter

<NRf>[A]

“Level1” current value

MINIMUM or MIN

Minimum current level

MAXIMUM or MAX

Maximum current level

Return parameter

<NR2>

Returns the “Level1”

current value.

Example

:CURRent:L1 MIN

Sets the current value to the minimum.

Query example

:CURRent:L1?

>1.0A

Returns the “Level1” current setting.

:CURRent:L2

Set

Query

Description

Sets or queries the CC mode “Level2” current. This

command is only applicable to dynamic modes.

Note: A different current value can be set for each

range (High/Mid/Low).

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 173 174

Komentarze do niniejszej Instrukcji

Brak uwag

Gw-instek PEL-3000 Series Programming Manual Instrukcja Użytkownika Strona 74

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Gw-instek PEL-3000 Series Programming Manual