Gw-instek GDS-1000-U Series Programming Manual Instrukcja Użytkownika Pobierz pdf (Strona 47)

COMMAND DETAILS

Note

This command will not alter the position of the

waveform (RefA, W1~15) in memory, unless the

template is saved with the :TEMPlate:SAVe

:MINimum command.

Before this command can be used, please set the

template mode to normal using

the :TEMPlate:MODe 0 command.

Before any Go-NoGo command can be used,

please use the :GONogo:FUNCtion 1 command to

initialize the oscilloscope.

Syntax

< Long >

< Short >

:TEMPlate:POSition:MIN

<NR2>

:TEMP:POS:MIN?

:TEMP:POS:MIN

<NR2>

:TEMP:POS:MIN?

Parameter/

Return parameter

<NR2>

-12.00 ~ 12.00 Div. 0 represents the center

division.

Example

:TEMP:POS:MIN 2.00

Sets the template to

the 2

grid division

above the center

division.

:TEMPlate:SAVe:MAXimum

Set

Description

Saves the maximum template.

Same as: Utility key → More (F5) →Go-NoGo

Menu(F1)→Template Edit(F1)→Save & Create(F4).

Note

Before this command can be used, please set the

template mode to normal using

the :TEMPlate:MODe 0 command.

Before any Go-NoGo command can be used,

please use the :GONogo:FUNCtion 1 command to

initialize the oscilloscope.

Syntax

< Long >

< Short >

:TEMPlate:SAVe:MINimum

:TEMP:SAV:MIN

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Gw-instek GDS-1000-U Series Programming Manual Instrukcja Użytkownika Strona 47

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Gw-instek GDS-1000-U Series Programming Manual