Gw-instek PSM-Series Programming Manual Instrukcja Użytkownika Pobierz pdf (Strona 20)

PSM SERIES PROGRAMMABLE POWER SUPPLY

PROGRAMMER MANUAL

⎯ 37 ⎯

:CURRent:PROTection:STATe

Function:

Set or query the overcurrent protection status.

Syntax:

:CURRent:PROTection:STATe {0|1|OFF|ON}

:CURRent:PROTection?

Examples:

:CURRent:PROTection:STATe 0 sets the over-current protection off.

If the overcurrent protection setting is on, the command of

CURRent:PROTection? will return the value of 1.

:CURRent:PROTection:TRIPped?

Function:

Query if the overcurrent protection circuit is tripped.

Syntax:

:CURRent:PROTection:TRIPped?

Returns:

0|1

Examples:

This command will returns “1” if the overcurrent protection is tripped and

not cleared or “0” if not tripped.

:CURRent:PROTection:DELay

Function:

Set the OCP delay value.

Syntax:

:CURRent:PROTection:DELay{<Decimal number>|MIN|MAX}

PSM SERIES PROGRAMMABLE POWER SUPPLY

PROGRAMMER MANUAL

⎯ 38 ⎯

Examples:

:CURRent:PROTection:DELay 3 sets the OCP delay value to 3 sec.

:CURRent:PROTection:DELay MIN sets the OCP delay value to 0.1

sec.

:CURRent:PROTection:DELay MAX sets the OCP delay value to 10.0

sec.

:CURRent:PROTection:DELay?

Function:

Query the OCP delay value.

Syntax:

:CURRent:PROTection:DELay?[MIN|MAX]

Return:

Examples:

:CURRent:PROTection:DELay? will return the OCP value.

:CURRent:PROTection:DELay? MIN will return 0.1 sec.

:CURRent:PROTection:DELay? MAX will return 10.1 sec.

:VOLTage:PROTection

Function:

Set the overvoltage protection value.

Syntax:

:PROTection:VOLTage {<Decimal numbers>|MIN|MAX}

Examples:

:VOLTage:PROTection 10 sets the overvoltage protection value to

10.000V(PSM-2010).

:VOLTage:PROTection MIN sets the overvoltage protection value to

0.000V(PSM-2010).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Gw-instek PSM-Series Programming Manual Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Gw-instek PSM-Series Programming Manual